When it comes to your vehicle's brakes, the Steel Brake Shoe is one of the most important components. Because of their durability, they can withstand impact and abrasion from a variety of types of vehicles. Because of their great stopping power, they are commonly referred to as rail skates. However, there are other types of wheels that are also known as rail skids. So, before buying a steel brake shoe, make sure you know a little bit about them.
To find a Steel Brake Shoe, you may need to know the model number of your vehicle. This can be obtained by checking the part number or model of your vehicle. If you need an old application, you may need to go a step further by measuring the brake drum size. There are several ways to locate a steel brake shoe. Make sure to check the part number to avoid mismatched parts. The OE part number is also a good indication of the correct size and type of brake shoe.
While there are benefits to both steel and plastic brake shoes, the former is quieter and less prone to damage. On the other hand, plastic brake shoes have lower abrasion resistance and are more prone to wear, so they should be replaced after optimal wear. Also, when replacing plastic brake shoes, make sure to check the hardware too. Damaged hardware and warped drums can increase the amount of wear that your brake shoes receive. These factors, as well as the type of vehicle you drive, can affect how long your steel brake shoe lasts.
A brake shoe is a curved metal piece that is placed inside the brake drum. It is attached to a backing plate with hold down hardware. When the brake pedal is pressed, hydraulic fluid is forced into the wheel cylinder. As the pistons of the wheel cylinder are pushed outward, the friction material pushes against the brake shoes. The result is a reduction in speed and a stop. Hence, a strong brake requires a brake shoe.
While brake pads are comparatively cheaper, brake shoes are easier to manufacture. But, you have to keep in mind that more expensive is not always better. You should also consider the make of your car and the terrain where you drive. The ambient temperature and personal driving preferences are also factors to consider when purchasing brake shoes. Remember, steel brake shoes are essential for heavy trucks, trailers and other large moving vehicles. You need the stopping force these types of vehicles require to stop.
The steel brake shoe is a more traditional option and offers superior grip than the conventional brake pads. In terms of durability, these shoes are more expensive than other types of brake pads, but they do provide better grip. However, there is a trade-off. Asbestos was once widely used for brake shoes, but because of its toxic nature, it was scrapped. Nowadays, synthetic aramid is the ideal material. However, synthetic aramid is not available in many places.
Number of rivet holes:32
Product OE number: EATON 819707